Edelpoxy STFN WET 164
Edelpoxy STFN WET 164
HB Surface Tolerant Epoxy Mastic Coating
- Mixing Ratio: 2.5:1
- Volume Solid: 0.85
- D.F.T. per coat: 100 - 150
- T.S.R.: 8.5 - 5.7
Benefits to use Chanda Paints
Highly Durable
Excellent durability even in harsh environmental condition due to very rich technology and formulation.
Excellent mechanical ,chemical and anti corrosive strength
Possess excellent mechanical strength and protect from high mechanical stress. Uncompromising in severe chemicals. Protect assets from highly corrosive environment.
Highly aesthetic value
Very good appearance with smooth finish and numerous beautiful colours are the essence of our products.
Value for money
Economical, pocket friendly and attractive.
Our Quality Promise
Guaranteed Quality
Every product meets or exceeds industry standards
Continuous Testing
Rigorous quality control at every stage
Industry Recognition
Trusted by leading organizations worldwide
Four golden rules and steps to get high performance of protective paints.
Surface Preparation
Blast clean where require to SA 2½ grade minimum of Swedish specification SIS-05-5900-1967. Surface profile should not exceed 65 microns. If blast cleaning is not required, follow manual / mechanical cleaning to or St2 or St3 grade. Surface should be clean, dry, free from oil, grease, salt and other surface contaminants before application of paint.
Assessment of environmental conditions
Surrounding temperature will be below 50°C and relative humidity not more than 90%. For proper curing of most paints, ambient temperature should not be lower than 10°C and adequate air flow should be provided during application.
Application of paint
All primers, intermediate and finish coats should be applied as per stipulated procedure and instructions. Required film thickness is very important for performance. For more details, refer Technical Data Sheets.
Curing and drying of paint
Curing and consequent drying depends on film thickness, humidity, temperature and ventilation or air movement. Proper curing with required film thickness are most important for high performance.
Similar Products
Edelpoxy STFN 161
- ( Epoxy Surface Tolerant Coatings )
- Mixing Ratio: 2.5:1
- Volume Solid: 0.82
- D.F.T. per coat: 100 - 125
- T.S.R.: 8.2 - 6.6